-12%
1441.1
1441.1
ZIR9863F.RA.140
ZIR9863M.RA
Z850F.FG.018-F
Z833F.FG.023
GP662.RA.035

jota kit 1441 ZIR GLOSS CHAIRSIDE KIT

฿1,240.00 ฿1,100.00

For perfect zirconium oxide restorations – using just one set!

 › Special diamond grit for high performance and durability

› Easy adjustment of contact points

› After an adjustment with only two steps to high gloss

› A perfect smooth and antagonist-friendly occlusal surface
enabled by the new Jota Swivel polisher

มีสินค้าอยู่ 20 (can be backordered)

หยิบใส่ตะกร้า
Compare
Share :
ZIR9863F.RA.140
ZIR9863F.RA.140
The new Jota Swivel from the ZIR Gloss series shows perfect results and durability. The dark green Swivel designed for prepolishing with a medium diamond grit and a specially developed bonding is ideal to pre-polishing the occlusal surface. 10’000 -12’000 rpm
ZIR9863M.RA
ZIR9863M.RA
The light green Jota Swivel from the ZIR Gloss series with fi ne diamond grit size is the fi nal stage of the polishing system. This diamond polisher is primarily used for high-luster polishing of the occlusal surface and shows huge advantages compared to the classical fl ame shape. 10’000 - 12’000 rpm
Z850F.FG.018-F
Z850F.FG.018-F
Diamond trimmer with bonded fi ne diamond grit same as used for Z833F. This instrument features a very smooth surface after preparation. The conical shape with rounded tip is ideal for the reworking margins. 160’000 rpm
Z833F.FG.023
Z833F.FG.023
Diamond trimmer with bonded fi ne diamond grit. In the case of the Z diamonds special grains with very regular angles and fl at surfaces are used to provide effi cient cutting performance and durability. This bullet shaped instrument is ideal for small adjustments on occlusal surfaces after the sintering step. 160’000 rpm
GP662.RA.035
GP662.RA.035
The Glaze Prep is a bullet shaped multi use abrasive. It is optimally suited for reworking and corrections of surfaces as well as trimming sprues and adjusting contact points. This instrument is used without water cooling on zirconium oxide. 25’000 rpm
Trimming the connection points
Trimming the connection points
The connection point of the support bar or sprue is trimmed by using the Glaze Prep GP662. No water cooling requiered! Otherwise the restoration has to be dried before sintering.
Smoothing-the-surface
Smoothing-the-surface
For surface smoothing and elimination of possible faults (e.g. errors caused by the trimming process) use the Glaze Prep GP662. Thinning of margins after the sintering process and adjusting contact points are done with same instrument.
Preparing-the-occlusal-surfaces
Preparing-the-occlusal-surfaces
If required, the occlusion and the occlusal contact points can be adjusted by using the Diamond Z833F. The Diamond is also interdentally used with multi-unit restorations.

Recommended speed

The speed should be set at about 25‘000 rpm.

Recommended speed

The speed should be set at about 25‘000 rpm.

Recommended speed

The speed should be set at about 160‘000 rpm.
Adjustments for perfect fit
Adjustments for perfect fit
For adjustments after the sintering process like margin thinning or small corrections for a perfect fit the Diamond Z850F is used.
Pre-polishing the surface and occlusion
Pre-polishing the surface and occlusion
The new Jota Swivel Polisher ZIR9863M is perfect for prepolishing the surface especially the occlusion. After small adjustments the Swivel is ideal to recover the initial surface gloss and smoothness.
High-lustre polish of the surface
High-lustre polish of the surface
The surface is finally precisely polished to a high-lustre using the Swivel ZIR9863F. Highlustre polishing supports the zirconium oxide with added stability and reduces the abrasion of the antagonist.
Final result
Final result

Recommended speed

The speed should be set at about 160‘000 rpm

Recommended speed

The speed should be set at about 10‘000 - 12‘000 rpm.

Recommended speed

The speed should be set at about 10‘000 - 12‘000 rpm.

Additional information

material

glass-ceramic

quae ab illo inventore
TOTAM REM APERIAM
Sed ut perspiciatis unde omnis iste natus error sit voluptatem accisantium dolor emque laudantium

Free Shipping

numquam eius mdi tempora incidunt ut labore et

Delivery

numquam eius mdi tempora incidunt ut labore et

Reviews

There are no reviews yet.

Be the first to review “jota kit 1441 ZIR GLOSS CHAIRSIDE KIT”

อีเมลของคุณจะไม่แสดงให้คนอื่นเห็น ช่องข้อมูลจำเป็นถูกทำเครื่องหมาย *

Your Review Your Review
Name Name

SKU: JT1441 Category: Tags: , , ,